7″ TFT LCD Color 2 Video Input Car RearView Headrest Monitor DVD VCR Monitor With Remote and Stand & Support Rotating The Screen

Specification:

Display Screen:

– Screen Size: 7 inch

– Display Component: Color TFT LCD

– Screen ratio 16:9/4:3 adjustable

– Resolution: 480 x 234 Pixels

– Contrast Ratio: 100:1

Housing Material: ABS

Video Frequency: PAL/NTSC

– Support rotating the screen

– Support adjust the Brightness, contrast, color.

– 2 ways to install: standing or mounting.

– Low power consumption.

– No Audio input or output.

– Comes with an IR remote controller for a easy operation.

– Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.

Power supply: DC 12V / 24V

Working Temperature:

– Work: 0 to 80 degrees C

– Storage: -10 to 80 degrees C

Product Dimensions(L x W x H): 193 x 135 x 25mm

Net Weight: 356g

Package Weight: 659g

Package Dimensions(L x W x H): 210mm x 147mm x 85mm

Package includes:

1 x Monitor

1 x Bracket

1 x Video & Power Cable

1 x Remote Controller

1 x User Manual

Product Features

  • 100% Brand New. 7 inch LED backlight color TFT LCD display.
  • High resolution with 480 x 234 Pixels. Comes with an IR remote controller for a easy operation.
  • Support rotating the screen and adjust the brightness, contrast, color.
  • With 2 AV input. AV1 connects to car DVD, VCR and other video equipment. AV2 to car backup camera.
  • Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.

For More Information – Click Here


Tagged , , , , , , , , , , . Bookmark the permalink.

3 Responses to 7″ TFT LCD Color 2 Video Input Car RearView Headrest Monitor DVD VCR Monitor With Remote and Stand & Support Rotating The Screen

  1. T and L "T" says:

    Can’t beat it for the price but needs more info added to the included instructions about using with a backup camera The monitor is a steal for the price and has a clear picture for use as a backup camera monitor 🙂 My gripe….the instructions :-(Even after everyone else’s warnings about the inadequate instructions I wasn’t too concerned because it only has three wires to hook up (red, black and blue) besides plugging in your video source(s). What the included instructions do not tell you is that if you are connecting a backup camera it MUST be connected to the Video 2 plug in order to work…

  2. R. Boccio says:

    Good 7″ monitor for the money! I ordered this monitor to hook up to my BOSS DVD Player in my van so that kids had a screen to see a movie or to see what music track was playing. Hookup is very easy, even though the instructions are basic to say the least. Red wire to +12v, Black wire to -12v, Blue Wire is hooked up to a backup camera sense signal so that when the camera comes on, the monitor will automatically switch to the camera input. I did not use this cable as I do not have a backup camera, I just left it as is. There…

  3. RosieAndMe says:

    Wiring is self evident First I should state that this unit is very easy for anyone with basic automotive wiring knowledge to install. What that means is, you should need no instructions, the wiring is self evident. Because of that the instructions that come with the unit are very brief.I purchased the package consisting of the monitor, the E363 camera and the Koolertron license plate camera. There is no comparison between the cameras, the E363 with 170 degree viewing angle wins. I have a 2007 Honda…